d a t a s h e e t : c l d - c t 1 5 9 . 0 0 0 cree ? smd led model # lp6-ppg-03-n data sheet 120-degree, 6.0 x 5.0 mm, smt led in green color with water-transparent lens applications indicators illuminations lcd back lights automobile applications absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit forward current i f 3 x 50 ma peak forward current note 1 i fp 3 x 100 ma reverse voltage v r 5 v power dissipation p d 3 x 255 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 c junction/ambient note 2 r thja 3 x 300 c/w junction/solder point r thjs 3 x 160 c/w notes: pulse width 0.1 msec, duty 1/10. rth test condition: mounted on pcb fr4 (pad size 40 mm 2 ) typical electrical & optical characteristics (t a = 25c ) characteristics symbol condition unit minimum typical maximum forward voltage v f i f = 3 x 50 ma v 4.0 5.1 reverse current i r v r = 5 v a 10 luminous flux v i f = 3 x 50 ma mlm 7000 luminous intensity i v i f = 3 x 50 ma mcd 1800 3500 dominant wavelength d i f = 50 ma nm 514 524 534 50% power angle 2? i f = 3 x 50 ma deg 120 ? ? ? ? 1. 2. subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct59.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lp6-ppg-03-n (i f = 3 x 50 ma) lamps are sorted to luminous intensity (i v ) and dominant wavelength ( d ) bins shown. orders for LP6-PPG1-03-N1 may be flled with any or all bins contained as below. all luminous intensity (i v ) and dominant wavelength ( d ) values shown and specifed are at i f = 3 x 50 ma. z1 or above y2 (r) y1 (p) x2 (n) x1 (m) important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. tolerance of measurement of luminous intensity is 10%. tolerance of measurement of dominant wavelength is 1 nm. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. 514 nm 534 nm dominant wavelength ( d ) luminous intensity (i v ) 4500 mcd (15 lm) 3550 mcd (10 lm) 2800 mcd (8 lm) 2240 mcd (6 lm) 1800 mcd (5 lm)
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cld-ct59.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 4/4 format #: cotco-d-074 rev.4 document no. spe/LP6-PPG1-03-N1 rev. no. 03 g g r r a a p p h h s s fig.4 relative luminous intensity vs. wavelength. ir(ua) fig.2 reverse current vs. reverse voltage. (relative luminous intensity) 800 domi wl= 524nm 50% 25% 0% 300 400 100% 75% 600500 700 half power wl=38nm wl(nm) -50.0 -30.0 -40.0 -10.0 -50 -40 vr(v) 0 -10 -30 -20 -20.0 0.0 fig.6 spatial distribution. -30 -60-90 90 6030 0 0% 20% 40% 60% 50% power angle : 0 80% 100% ie(%) t ( c) temperature. derating based on tjmax=110 c fig.5 maximum forward dc current vs 20 40 0 20 0 8060 100 40 60 80 100 if(ma) 4.8 80.0 fig.1 forward current vs. fig.3 forward current. relative luminous intensity 0.0 0.0 0.5 40.020.0 60.0 forward voltage. 1.5 1.0 2.0 2.5 3.2 0.0 20.0 60.0 40.0 80.0 4.03.6 4.4 if (ma) 100.0 100.0 if(ma) vf(v) 5.2 r th ja = 150 c/w r th js = 300 c/w items signatures date revision history prepared by wangfj 2007-01-11 rev.no date change description checked by xiejh 2007-01-11 02 2006-12-11 release. change iv rank: from x1-y1 to x1-y2 approved by davidliu 2007-01-11 03 2007-01-10 change vf(typ)4.5 to 4.0 ,change graphs. fcn# fcn20070014 data is subject to change without prior notice; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct59.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentr ation values (also referred to as the threshold limits) permitted for such substances, or are used in an ex empted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the ey e. 2/4 format #: cotco-d-074 rev.4 document no. spe/LP6-PPG1-03-N1 rev. no. 03 a a p p p p l l i i c c a a t t i i o o n n s s : : d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - indicators - illuminations - lcd back lights - automobiles applications a a b b s s o o l l u u t t e e m m a a x x i i m m u u m m r r a a t t i i n n g g s s a a t t t t a a = = 2 2 5 5 c items symbol absolute maximum rating unit forward current i f 3 x 50 ma peak forward current* i fp 3x100 ma reverse voltage v r 5 v power dissipation p d 3x255 mw operation temperature t opr -40 ~ + 100 c storage temperature t stg -40 ~ + 100 c junction temperature tj +110 c junction/ambient ** r th ja 3 x 300 c /w junction/solder point r th js 3 x 160 c /w electrostatic discharge classification esd class 1 ( mil-std-883e ) *pulse width<=0.1msec duty <=1/10 ** rth test condition: mounted on pc board fr 4(pad size>=40mm 2 ) t t y y p p i i c c a a l l e e l l e e c c t t r r i i c c a a l l & & o o p p t t i i c c a a l l c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s ( ( t t a a = = 2 2 5 5 c ) ) items symbol condition min. typ. max. unit = 3 x 50ma --- 4.0 5.1 v forward voltage v i f f reverse current i v = 5v --- --- 10 p a r r luminous flux - i v f = 3 x 50ma mlm --- 7000 --- luminous intensity i i v f = 3 x 50ma mcd 1800 3500 --- = 3 x 50ma dominant wavelength 514 524 534 nm i o f d = 3 x 50ma --- 120 --- deg 50% power angle 2 t ? i f
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct59.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LP6-PPG1-03-N1-00001 smd 120 pure green 524nm, full rank, tape & reel * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tape pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
